PC-104/PCI-104 DAQ & Communication Cards

PC/104 Single Board Computer modules include embedded DAQ, PC/104 DAQ, and PC 104 add-on peripheral modules - perfect for space limited applications.

AIIS-1750

The AIIS-1750 offers isolated digital input channels as well as isolated digital output channels with isolation protection up to 2,500 VDC, which makes them ideal for industrial applications where high-voltage isolation is required. All of the input signals can be used as interrupt request signals and also disable or enable the interrupt in each channel and support the edge of the input signals, at which to generate an interrupt. all of AIIS-1750 DI channel has a digital filter to prevent wrong recognition of input signals from carrying noise or a chattering.
AIIS-1882

The AIIS-1882 is a 4-ch lighting control with 4-ch digital trigger, 12-ch isolated DI/16-ch isolated DO expansion module. The programmable delay time, PWM high/low time, and output lighting duration make it suitable for machine vision applications. All I/O signals are protected by isolation circuit.
PCM-3610

The PCM-3610 isolated dual-port RS-232 and RS-422/RS-485 interface module supports all popular serial communication protocols and provides reliable high speed communication over long distances (4000 ft/1.2 km)
PCM-3612

Advantech's new PC/104 module, the PCM-3612 Dual Port RS-422/485 Communication Module, features two surge protected, RS-422/485 configurable serial communication channels to provide an economical and compact multi-serial solution for systems with a PC/104 bus.
PCM-3612I

4-port RS-232/422/485 PCI-104 Module
PCM-3614

The PCM-3614 is a PC/104-compatible module with four individually configurable RS-422/485 ports. It works with PC/104 CPU modules to extend additional RS-2422/485 ports. The PCM-3614 also features lots of functions such as high transmission speed of 921.6 kbps, shared IRQ and more. It also provides high-performance 16C550 UART communication chip with 16-byte FIFO to reduce CPU load. This makes the PCM-3614 especially suitable for multitasking environments.
PCM-3641

The PCM-3641 is a PC/104-compatible module with four individually configurable RS-232 ports. It works with PC/104 CPU modules to extend additional RS-232 ports. The PCM-3641 also features lots of functions such as high transmission speed 460 kbps; independent/shared IRQ and more. It also provides high-performance 16C554 UART communication chip with 16-byte FIFO to reduce CPU load. This makes the PCM-3641 especially suitable for multitasking environments.
PCM-3680

The PCM-3680 is a special purpose communication module which offers connectivity of the Controller Area Network to your PC. With the built-in CAN controller, the PCM-3680 provides bus arbitration and error detection with automatic transmission repeat function.
PCM-3680I

PCM-3680I is designed for connecting control units and transmissions in automation applications. CAN enables real-time data transmission and error detection; and even when errors accidentally occur, CAN networks will automatically repeat transmissions, drastically reducing data loss and providing higher levels of security. Furthermore, PCM-3680I features an optical isolation protection of 2500 VDC which greatly ensures system reliability by protecting data against damage.
PCM-3718H

100 kS/s, 12-bit, 16-ch Multifunction Module
PCM-3718HG

100 kS/s, 12-bit, 16-ch Multifunction Module with High Gain
PCM-3718HO

PCM-3718HO is a fully multifunctional card with PC/104 interface, 16 analog inputs, one analog output, two 8-bit digital I/O channels, and a free counter function. Such a broad range of functions available in a single PC/104 card is a significant breakthrough, and will be appreciated by embedded systems developers with demanding space requirements. Using the compact PC/104 form factor, the card enables better integration and can be fitted in smaller systems such as embedded industrial PC like UNO-2170 or UNO-2171.
PCM-3724

The PCM-3724 is a PC/104 standard DIO module which attaches to the piggyback connector on your CPU card or PC/104 CPU module. The PCM-3724's two intel 8255 PPI compatiable chips provide 48 bits of parallel digital input/out.
PCM-3725

The PCM-3725 is a 8-ch relay actuator and 8-ch isolated digital input module that attaches to the PC/104 connector on your CPU card or PC/104 module. It offer eight relay actuators and 8-bit isolated digital input channels.
PCM-3730

16-ch Isolated Digital I/O PC/104 Module
PCM-3730I

With onboard 32-ch isolated digital I/O and support for high-voltage isolation (2,500 VDC) on each input/output channel, the PCM-3730I can resist noise interference and delivers reliable performance. Additionally 32-ch isolation ensures accurate input/output data values while also allowing the system to simultaneously access more data.
PCM-3753I

PCM-3753I is a 96-bit digital I/O card for the PC-104 Plus bus. The card emulates mode 0 of the 8255 PPI chip, but the buffered circuits offer a higher driving capability than the 8255. The 96 I/O lines are divided into twelve 8-bit I/O ports: A0, B0, C0, A1, B1, C1, A2, B2, C2, A3, B3 and C3. You can configure each port as input or output via software.
PCM-3761I

PCM-3761I, an 8-ch Relay and 8-ch Isolated Digital Input PCI-104 card, not only features 8 Form C type relay channels and 8 channels of digital input with isolated protection, but also delivers reliable operation and the fast new PCI-104 form factor for machine and production automation purposes.

PC-104/PCI-104 DAQ & Communication Cards

The PCM-3610 isolated dual-port RS-232 and RS-422/RS-485 interface module supports all popular serial communication protocols and provides reliable high speed communication over long distances (4000 ft/1.2 km)

Advantech's new PC/104 module, the PCM-3612 Dual Port RS-422/485 Communication Module, features two surge protected, RS-422/485 configurable serial communication channels to provide an economical and compact multi-serial solution for systems with a PC/104 bus.

4-port RS-232/422/485 PCI-104 Module

The PCM-3680 is a special purpose communication module which offers connectivity of the Controller Area Network to your PC. With the built-in CAN controller, the PCM-3680 provides bus arbitration and error detection with automatic transmission repeat function.

100 kS/s, 12-bit, 16-ch Multifunction Module

100 kS/s, 12-bit, 16-ch Multifunction Module with High Gain

The PCM-3724 is a PC/104 standard DIO module which attaches to the piggyback connector on your CPU card or PC/104 CPU module. The PCM-3724's two intel 8255 PPI compatiable chips provide 48 bits of parallel digital input/out.

The PCM-3725 is a 8-ch relay actuator and 8-ch isolated digital input module that attaches to the PC/104 connector on your CPU card or PC/104 module. It offer eight relay actuators and 8-bit isolated digital input channels.

16-ch Isolated Digital I/O PC/104 Module

PCM-3761I, an 8-ch Relay and 8-ch Isolated Digital Input PCI-104 card, not only features 8 Form C type relay channels and 8 channels of digital input with isolated protection, but also delivers reliable operation and the fast new PCI-104 form factor for machine and production automation purposes.